Influence of structural and chemical properties on electron transport in mesoporous ZnO-based dye-sensitized solar cell

Ionics - Two chemical bath deposition (CBD) solutions were prepared at two different temperatures of 60 and 80 °C for dye-sensitized solar cell (DSSC) application. The deposition time...     

Flexible carbon nanostructures with electrospun nickel oxide as a lithium-ion battery anode

Carbon nanostructures (CNS) with high electrical conductivity and unique branched structure of carbon nanotubes combined with NiO nanofibers (NFs) were used as anode for lithium-ion batteries. CNS works as a framework substrate for the anodic conversion reaction of nickel oxide (NiO). Electrochemical performance and behavior of CNS/NiO anodes is compared with the conventional carbon (C)/NiO anodes. CNS/NiO NF-based anode retains high specific capacity under different current densities compared to C/NiO anode. Moreover, specific capacity as high as 450 mAh/g for CNS/NiO NF anode is observed compared to only 90 mAh/g for C/NiO NFs using a current density of 500 mA/g after 500 cycles. This improved performance is attributed to the highly conductive network of CNS leading to efficient charge transfer. The high porosity, electrical conductivity as well as the branched and networked nature of CNS reveal to be of critical importance to allow the electrochemical conversion reactions.     

Aggregation and microenvironmental properties of gemini and conventional mixed surfactants systems: A fluorometric study

Aggregation behavior of cationic gemini (hexanediyl-1,5-bis(dimethylcettylammonium bromide) (16-5-16)) surfactant with conventional single chain surfactants cetyltrimethylammonium bromide (CTAB) and tetradecyltrimethylammonium bromide (TTAB) were studied with the help of fluorescence measurements. Fluorescence probe is a proficient technique for examining the surfactant-surfactant interaction and aggregation. The micelle aggregation number (N _agg) was measured using steady-state fluorescence quenching method. The micelle aggregation numbers of binary combinations fall between those of constituent surfactants. The micropolarity (I ₁/I ₃), binding constant (K _sv) and dielectric constant (D _exp) of mixed systems were determined from the ratio of peaks intensity in the pyrene fluorescence spectrum. The I ₁/I ₃ values were found to be more than >1, showing more polar environment around pyrene in the mixed micelle as compared to the pure micelles.     

Stabilization of Catalytically Active Cu+ Surface Sites on Titanium–Copper Mixed‐Oxide Films

The oxidation of CO is the archetypal heterogeneous catalytic reaction and plays a central role in the advancement of fundamental studies, the control of automobile emissions, and industrial oxidation reactions. Copper‐based catalysts were the first catalysts that were reported to enable the oxidation of CO at room temperature, but a lack of stability at the elevated reaction temperatures that are used in automobile catalytic converters, in particular the loss of the most reactive Cu⁺ cations, leads to their deactivation. Using a combined experimental and theoretical approach, it is shown how the incorporation of titanium cations in a Cu₂O film leads to the formation of a stable mixed‐metal oxide with a Cu⁺ terminated surface that is highly active for CO oxidation.     

A Cost‐Effective 3D Hydrogen Evolution Cathode with High Catalytic Activity: FeP Nanowire Array as the Active Phase

Iron is the cheapest and one of the most abundant transition metals. Natural [FeFe]‐hydrogenases exhibit remarkably high activity in hydrogen evolution, but they suffer from high oxygen sensitivity and difficulty in scale‐up. Herein, an FeP nanowire array was developed on Ti plate (FeP NA/Ti) from its β‐FeOOH NA/Ti precursor through a low‐temperature phosphidation reaction. When applied as self‐supported 3D hydrogen evolution cathode, the FeP NA/Ti electrode shows exceptionally high catalytic activity and good durability, and it only requires overpotentials of 55 and 127 mV to afford current densities of 10 and 100 mA cm², respectively. The excellent electrocatalytic performance is promising for applications as non‐noble‐metal HER catalyst with a high performance–price ratio in electrochemical water splitting for large‐scale hydrogen fuel production.     

Environmentally Benign Synthesis of 2-Pyrazolines and Cyclohexenones Incorporating Naphthalene Moiety and Their Antimicrobial Evaluation

We reported the environmental benign synthesis of chalcones,2-pyrazolines and cyclohexanones under microwave irradiation.Chalcones were obtained by the condensation of each of 2-hydroxyacetophenone derivatives with a-naphthaldehyde under microwave irradiation.The condensation reactions of each of synthesized chalcones with phenyl hydrazine under microwave irradiation in the presence of dry acetic acid as a cyclizing agent gave 2-pyrazolines.Also,the new cyclohexenone derivatives,valuable intermediates to synthesize fused heterocycles,have been prepared by the cyclocondensation of each of hydroxychalcones with ethyl acetoacetate.The structures of the synthesized compounds were elucidated by infrared（IR） spectrometry,nuclear magnetic resonance（NMR）,mass spectrometry（MS） and elmental analysis.The results indicate that unlike classical heating,microwave irradiation results in higher yields with shorter and cleaner reactions.The synthesized compounds were screened for antimicrobial activity against Staphylococcus aureus,Escherichia coli,Candida Albicans and Aspergillus niger.We clarified the effects of different substituents in the tested compounds on the obtaind antibacterial activities and antifungal activities.     

Miniaturization of GPS patch antennas based on novel dielectric ceramics Zn(1−x)MgxAl2O4 by sol–gel method

The need for miniaturization and weight reduction of GPS patch antennas has prompted the search for new microwave dielectric materials. In this study, a sol–gel method was used to prepare Zn_(1?x)Mg_xAl₂O₄ thin films and fabricate GPS patch antennas at a low annealing temperature (700 °C). X-ray diffraction (XRD) patterns, field emission scanning electron microscopy images, Fourier transform infrared spectra, and optical band gap analyses confirmed the nanostructure of (Mg/Zn)Al₂O₄. The XRD patterns displayed the characteristic peaks of (Mg/Zn)Al₂O₄ with a face-centered cubic structure. Mg addition decreased the crystallite size, surface morphology, and lattice parameters of the resultant films, evidently affecting their density and dielectric constant (? _r ). Based on the material investigated and microwave antenna theory, GPS patch antennas were fabricated using Zn_(1?x)Mg_xAl₂O₄ and then studied using a PNA series network analyzer. The fabricated patch antennas with different ? _r ceramics decreased in size from 12.5 to 10.8 cm². The patch antennas resonated at a frequency of 1.570 GHz and provided a return loss bandwidth between ?16.6 and ?20.0 dB; their bandwidth also improved from 90 to 255 MHz. The GPS patch antenna fabricated from Zn_0.70Mg_0.30Al₂O₄ showed an excellent combination of return loss (?20.0 dB), small size (10.8 cm²), and wide bandwidth (255 MHz). Therefore, addition of Mg improves antenna performance and decreases the dimensions of the device.     

Mononuclear High-spin Octahedral Cobalt(II) Complex with Positive Axial Magnetic Anisotropy: Synthesis,Crystal Structure,and DFT Studies

This article outlines the magnetic features of a new six–coordinate high-spin cobalt(II) complex cis-[Co^II(tmphen)₂(NCS)₂] ( 1 ) achieved via the reactions of cobalt(II) thiocyanate with 3,4,7,8-tetramethyl-1,10-phenanthroline. The complex 1 was thoroughly characterized by different analytical and spectroscopic techniques and further confirmed by single X-ray crystal diffraction pattern. Complex 1 is a neutral molecule and adopt highly distorted six-coordinate CoN₆ octahedral coordination sphere surrounded by two thiocyanate N atoms in cis locations and the equatorial plane is occupied by two imine N atoms from the two tmphen ligand while the remaining two imine N atoms reside in the axial positions. Magnetic susceptibility data of complex 1 revealed that the χ_ΜT values decrease significantly to a value of 1.49 cm³ · K · mol^–1 at 2.0 K on decreasing temperatures below 100 K, mainly ascribed to the significant spin–orbit coupling (SOC) of six-coordinate Co^II ions. Furthermore, a field-dependence measurement was performed at 2 K, which shows a positive curvature up to 27 kOe, while it becomes linear up to 2.01 Nμ_B, which authenticated the fact that only the lowest Kramers doublet of ground state is appreciably populated.     

Preparation and antimicrobial properties of LL‐37 peptide immobilized lignin/caprolactone polymer film

The use of biopolymers has gained priority in tissue engineering and biotechnology, both as dressing material and for enhancing treatment efficiency. There is a demand for new biopolymers designed with protease inhibitors and antimicrobials. LL‐37 is an important antimicrobial peptide in human skin and exhibits a broad spectrum of antimicrobial activity against bacteria, fungi, and viral pathogens. Using lignin which is an abundant carbohydrate polymer in nature and a polyacrylic acid, we prepared a lignin/caprolactone biodegradable film by plastifying caprolactone and polyacyrlic acid. Lignin/caprolactone biodegradable film was activated with CDI and then immobilized LL‐37 peptide. The structure was elucidated in terms of its functional groups by attenuated total reflectance‐fourier transform infrared spectroscopy (ATR‐FTIR), and the morphology of the lignin/caprolactone biodegradable film was characterized by scanning electron microscopy (SEM) before and after the immobilization process. The amount of LL‐37 immobilized was determined by ELISA method. It was found that 97% of LL‐37 peptide was successfully immobilized onto the lignin/caprolactone biodegradable film. Antimicrobial activity was determined in the lignin/caprolactone biodegradable film samples by quantitative antimicrobial activity method. According to the results, LL‐37 immobilized lignin/caprolactone biodegradable film samples were effective on test organisms; Gram‐positive Staphylococcus aureus and Gram‐negative Escherichia coli. In bio‐compatibility assays, the ability to support tissue cell integration was detected by using 3 T3 mouse fibroblasts. Samples were examined under transverse microscope, non‐immobilized sample showed a huge cellular death, whereas LL‐37 immobilized lignin/caprolactone biodegradable film had identical cellular growth with the control group. This dual functional lignin/caprolactone biodegradable film with enhanced antibacterial properties and increased tissue cell compatibility may be used to design new materials for various types of biological applications.     

Gold(I)‐Catalyzed Cycloisomerization of 3‐Alkoxyl‐1,6‐diynes: A Facile Access to Bicyclo[2.2.1]hept‐5‐en‐2‐ones

A novel gold‐catalyzed cycloisomerization of 1,6‐diynes was achieved, providing an atom‐economic approach to a diverse set of bicyclo[2.2.1]hept‐5‐en‐2‐ones in moderate to good yields. With unsymmetrical starting materials with two different internal alkynyl substituents, to some extent, the regioselectivity could be controlled by both electronic and steric factors. This unprecedented reactivity pattern may inspire new and unconventional strategies for the preparation of bridged ring systems.